You are here: Shop On-Line > Insta-Cure + Gap Filling 2 oz.
Insta-Cure + Gap Filling 2 oz.
Insta-Cure + is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Please note that phone orders should only be called in from 9am to 5pm EST. You may e-mail us after hours. Thank You!