Dare C-195 Cessna

Dare C-195 Cessna
by Brodak


Availability: In stock


Quick Overview

The 1:7.25 scale Dare Design C-195 has a 60” wing span and is set up for 5-channel R/C. This wing is cantilevered, and features scale Fowler Flaps, incorporating 6 sub-micro servos for the flight controls. An economical 450-class Outrunner motor and 2S Lipoly battery provides power. The wings plug in, and are removable without tools, and functional cabin door offer easy access to the battery.  

No power or electronic parts are included in this kit.

Flying Wt: 28.7 oz.

W/loading: 7.3 oz/sq. ft.

Scale: 1:7.25     

Power: 450 Class Outrunner motor w/20A ESC,  

Prop: APC 11-5.5/E, 

Battery: 2S-2200 mah Li-Poly, 

Guidance: 5 ch. R/C using 2- 8 gram (Rudder & Elevator) and 4- 6.5 gram (Flaps & Ailerons) Sub-Micro Servos


Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • C-195
  • C-195_


Wing Span: 60 in.
Plane Length: 46.25"
Wing Area: 591 sq. in.
Engine: Power: 450 Class Outrunner motor


Our Cessna 195 kit also provides all of the parts necessary to build the model with either the original tricycle landing gear or, (as shown) in the tail dragger conversion. The conversion is clearly called out, so no modification will be needed to build either version.  Fowler Flaps are a feature of this kit.  The wings are removable for easy transport, and battery access is through the scale cabin door.

Additional Information

SKU DA-564

Kit Features

This kit includes all Laser Cut parts from contest balsa and lite-ply, full-size plans & instructions. In addition you’ll also find a special vac-formed cowl, dummy radial engine, and fairing, Pre-bent wire parts, hardware, clear acetate, Carbon Fiber dowels, and more. The C-195 was also converted with an aftermarket Conventional Landing Gear for those who prefer the Tail Dragger to the standard Tricycle Gear.
Please note that phone orders should only be called in from 9am to 5pm EST. You may e-mail us after hours. Thank You!