Tru-Launch Stooge

Tru-Launch Stooge by Brodak
Item#

Quick Overview

BH-848
Availability: In stock
$36.99
Qty:

Quick Overview

Have you ever wondered if it was possible to launch your own plane? Well, the Tru-Launch Stooge is just what you’re looking for. This is reliable and safe launching device.

Details

It features a sturdy 1/8 inch aluminum base plate onto which are riveted three tuned aluminum uprights. These uprights are drilled to accept a steel release pin, a steel spring and a locking collar. The stooge is designed to be mounted to a thin piece of plywood or aluminum, which is in turn pinned into the ground with long steel spikes made from sharpened 1/8 inch diameter music wire. A wire or strong cord is attached to the looped end of the release pin. This wire must be long enough to extend out to the pilot's position. A 1/16 inch music wire loop must be affixed to the tailwheel strut on the model. The loop in the end of this wire is loaded into the stooge by pulling the release pin back. Once the model is loaded into the stooge, the engine may be safely started and the pilot can walk to the center of the circle and pick up the flying handle. He can then pick up the release cord and give it a constant pull, until the release pin lets the model go.

Additional Information

SKUBH-848
Please note that phone orders should only be called in from 9am to 5pm EST. You may leave a message with voicemail after hours or e-mail us. Thank You!